Sealing Ring NBR 45x62x7 | Double Lip Seal
Rating:
(0)
EUR €
- EUR €
- USD $
45 × 62 × 7 RICH Sealing Ring – 45 × 62 × 7 mm
Technical Specifications:
- Brand: RICH
- Type: Sealing Ring
- Inner Diameter (d): 45 mm
- Outer Diameter (D): 62 mm
- Width (B): 7 mm
- Material: NBR (Nitrile Butadiene Rubber)
- Profile: TC (Double Lip)
- Temperature Range: -30°C to +100°C
- Spring Material: Carbon Steel
- Country of Origin: China
Performance Characteristics:
- Double Lip Profile (TC): Primary sealing lip with tension spring and auxiliary dust lip for contaminant exclusion.
- NBR Construction: Supports compatibility with mineral oils, hydraulic fluids and grease.
- Rotary Shaft Sealing: Supports fluid retention and exclusion of external contaminants.
- Thermal Range: Operational stability between -30°C and +100°C.
- Elastomer Outer Shell: Provides static sealing within the housing bore.
The 45 × 62 × 7 RICH sealing ring is an NBR-based TC profile sealing element with a double‑lip configuration. The primary lip incorporates a tension spring to maintain radial contact on the shaft surface, while the auxiliary dust lip supports contaminant exclusion. The elastomer outer shell provides static sealing within the housing bore. The component is intended for rotary shaft sealing where external lubrication is available.
Additional Technical Data:
- Designation: 45 × 62 × 7
- Profile: TC (Double Lip)
- Material: NBR
- Spring: Carbon Steel
Transparency Note: This component is manufactured under the RICH brand. Dimensions and references are used for identification and do not imply affiliation with other manufacturers.
Data sheet
Inner Diameter
45
Outer Diameter
62
Width
7
16 other products in the same category:
arrow_upward